1 Check if your iPhone supports eSIM

Go to Settings > Cellular and check if there is an "Add Cellular Plan" or "Add eSIM" option. If yes, your device is eSIM-compatible.

2 Check for SIM Lock

Go to Settings > General > About and look for Carrier Lock. It should say "No SIM restrictions". Otherwise, eSIM may not work properly.

3 Make sure you're connected to the internet

Ensure your device is connected to Wi-Fi or mobile data. A stable internet connection is required to activate the eSIM.

4 Remove Conflicts with Other SIMs

Go to Settings > Cellular and disable or remove any other eSIMs to avoid issues during activation.

5 Install Your eSIM

6 Set Jett On as the active data line

Go to Settings > Cellular, select the newly added eSIM, rename it to "Jett On", and set it as the default mobile data line.

Disable Allow Mobile Data Switching to make sure your main SIM doesn't consume data.

7 Restart Network Connection

Turn on Airplane Mode for 10 seconds, then turn it off. This helps refresh the network signal.

8 Test Your Internet

Open Safari or another browser to check your connection. If the page loads, your eSIM is working!