1 Check if Your Device Supports eSIM

Go to Settings > About Phone and check the device model (e.g., Xiaomi 13 Pro, Xiaomi 12 Pro, Xiaomi 13 Ultra). Find the EID number under Settings > About Phone > Status or by dialing *#06#. If an EID appears, your device supports eSIM. Note: Some models like the Redmi Note series do not support eSIM.

2 Ensure Your Device is Unlocked

Confirm that your device is not locked to a specific carrier. If locked, contact your carrier to unlock it.

3 Ensure Internet Connection

Make sure your device is connected to Wi-Fi or mobile data. A stable internet connection is required for eSIM activation. Avoid public Wi-Fi networks.

4 Remove Conflicts with Other SIMs

Go to Settings > SIM Cards & Mobile Networks and disable or remove other eSIMs or physical SIMs. Xiaomi devices typically allow only one SIM to be active for data at a time.

5 Install Your eSIM

6 Set Jett On as Default Data Line

Go to Settings > SIM Cards & Mobile Networks, select the newly added eSIM, rename it to "Jett On", and set it as the default data line.

Disable the physical SIM to prevent it from consuming data.

7 Enable Data Roaming

Go to Settings > SIM Cards & Mobile Networks > Jett On and enable "Data Roaming". This is required for the eSIM to work at your destination. Do not activate the eSIM until you reach your destination to avoid consuming the data package.

8 Refresh Network Connection

Turn on Airplane Mode for 10 seconds, then turn it off. This refreshes the network signal.

9 Test Your Internet

Open Chrome or another browser to check your connection. If the page loads, your eSIM is working!

10 Manual Network Selection (If Needed)

If the device does not connect to a network after enabling data roaming, select a network manually:

• Go to Settings > SIM Cards & Mobile Networks > Jett On.
• Turn off "Automatically select network".
• Scan for available networks and choose the one with the best signal.